Showing results 1 to 20
AMXmachinery
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachinery
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachinery1
PART: 12592 - SHREDDER - BALEMASTER - MODEL 1440 - 30 HP – 63”
PART: 12592 - SHREDDER - BALEMASTER - MODEL 1440 - 30 HP – 63”USED - GOOD CONDITIONMotor Leeson 30 HP, 3/60/208-230/460 Volt, 1785 RPM
AMXmachinery1
PART: 12539 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HP
PART: 12539 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HPUSED - GOOD CONDITIONModel 3CAXS3036BV(3) Rotors 36" wide30" x 36" top feed openingBaldor Reliance 40 HP , 3/60/ 230-460 volt, 1775 RPM motorBottom discharge approx. 28" x 28”
AMXmachinery1
PART: 12591 – SHREDDER – WOOD – PAPER - 100 HP – VERTICAL – VECOPLAN
PART: 12591 – SHREDDER – WOOD – PAPER - 100 HP – VERTICAL – VECOPLANUSED – VERY GOOD CONDITIONModel: VAZ 1300 SHopper Opening: 52" x 50"Hopper Volume: 3.25 Cubic YardsRotor Diameter: 15"Number of Cutters: 37/60 (40x40)Rotor Speed: 120-145 RPMHP: 100Electrical: 460/3/60Manufactured: 2013
AMXmachinery
PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVO
PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVOUSED – VERY GOOD CONDITION – REFURBISHEDMODEL: SP 6PThese machines have been designed for spray lineal parts i.e. Moldings, Flooring, Wood Strips, etc.and can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for di...
AMXmachinery
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINA
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881
AMXmachinery
PART: 12576 – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED – GOOD CONDITIONS Capacity: 75″ x 169″ Depth of Cut: 2″ Max. Blade Size: 8-5/8″(220mm) Main motor 4 HP 230 volts three phase Depth of cut 2” max Scoring unit with insert knives Saw head rotates 90 degrees for rip or cross cutting Automatic shifting back grid Two gauging bars with flip stop for midway fenceBottom rollers with manual control for easy movement of larger panels Approx....
AMXmachinery
PART: 12584 – BORING MACHINE - RITTER R246
PART: 12584 – BORING MACHINE - RITTER R246 USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control.Equipped with: 4 Overhead adjustable pneumatic holddowns on each head, 72" long...
AMXmachinery
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART: 12575-E – BAND MAGNETIC SEPARATOR Unused, “New” Conditions Motor: 3 HP, 230/460V/3/60 Marca: Wolverine 29-1/2” wide x 70” long Belt Motor: WEG 3HP Approximate Weight/unit (kgs): 776 Aproximate Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572 Speed - It is fixed speed and can be changed with a controller. Magnet power is strong - the original design was to pull small scrap metal from sand on conveyor belt.
AMXmachinery
PART: 12573 - PRODUCTION DRILLING MACHINE - RILESA - UNI-X 2200 MM
PART: 12573 - PRODUCTION DRILLING MACHINE - RILESA - UNI-X 2200 MM USED - VERY GOOD CONDITIONPLC Control System with 15” Color TFT Touch-screen DisplayPneumatic magazine with ergonomic and user-friendly accessEnd Mounted Horizontal Drilling Groups: 2 @ 1.1kW = 1.5HP 3-5000RPMRear Mounted Horizontal Drilling Groups: 4 @ 1.1kW = 1.5HP 4000RPMTop Mounted Vertical Drilling Groups: 6 @ 1.1kW = 1.5HP 4000RPMPneumatic side movement of drill groups for copy function of holesBackstop clamp ...
AMXmachinery
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN USED - GOOD CONDITION Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on a common shaft - pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the Model SL36x60 reaches full capacity at 100-psi plant air pressure.Edge pressure is applied by eight push...
AMXmachinery
PART: 12505 - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12505-E - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of panelsIntegrated dust...
AMXmachinery
PART: 12569E - PACK SEALER SHRINK TUNNEL - TRUELINE
PART: 12569E - PACK SEALER SHRINK TUNNEL - TRUELINE Condition: New/Other Brand: Truline Packaging MPN: PP1519ECMCU 20” X 16” X 6” Mfg: USA 110V, 1 PH
AMXmachinery
PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS - BAKER
PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS - BAKER Used - Good condition 460V | 3 Phase | 22’ in length | 2 20HP saw motors | Extra parts including 5-6 bands
AMXmachinery
PART: 12567 - HORIZONTAL BAND RESAW - BAKER
PART: 12567 - HORIZONTAL BAND RESAW - BAKER Used - Good condition 3 Phase | 570V | 30HP | Capacity is roughly 6" wide x 6" tall
AMXmachinery
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504 In Good Running Condition & Ready to ShipMain motor: 25HP, 220V/440V* (prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump - Main Saw Motor - 25HPMaximum cutting capacity: 10" x 16"Distance from blade to conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x 1" WSaw blade speed: 7300 FPMFloor to table height: 40"Infeed table: 106" L x 16" WInfeed belt: 215-3/4" ...
AMXmachinery
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop Station for 230v, 3phChip Collect in Two Lower Plastic Bags Filtration Surface - sq.ft - 331.63
AMXmachinery
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x 24" DClamping operation is accomplished through four dual pod pressure bars which are activated and can be individually selected for quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic locks Carriage mounted operators panel
AMXmachinery
PART: 12563 - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES
PART: 12563-E - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES USED - GOOD CONDITION  MOTOR: 5.5 HP, 220/380V, 60 HZ, 3400 RPMThe Asymmetric Copy Lathe reproduces asymmetric wood components by copying a three-dimensional template. Ideal for copying items such as wooden gun or rifle stocks, Queen Anne style table or chair legs, tool handles, sandals, hangers, sport items musical instruments and so on.