PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS - BAKER Used - Good condition 460V | 3 Phase | 22’ in length | 2 20HP saw motors | Extra parts including 5-6 bands

PART: 12567 - HORIZONTAL BAND RESAW - BAKER Used - Good condition 3 Phase | 570V | 30HP | Capacity is roughly 6" wide x 6" tall

PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504 In Good Running Condition & Ready to ShipMain motor: 25HP, 220V/440V* (prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump - Main Saw Motor - 25HPMaximum cutting capacity: 10" x 16"Distance from blade to conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x 1" WSaw blade speed: 7300 FPMFloor to table height: 40"Infeed table: 106" L x 16" WInfeed belt: 215-3/4" ...

PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000USED – GOOD CONDITIONMINIMUM LENGHT 16”VARIABLE SPEED 75 - 250 LINEAL FEET/MINMAIN MOTOR 15 HP, 3,600 - 5,000 RPMFEED MOTOR 5 HPMACHINE DIMENSIONS 42” W X 48” L X 46” HMACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” HWEIGHT: 3,000 LBSSEVERAL ROLLERS INFEED & OUTFEEDSEVERAL DIAMETER CUTTERHEADSSEVERAL KNIVE SETS & SETTERS

PART: 12535 - DOWEL MILLING MACHINE - HAWKERUSED – GOOD CONDITION – AS IS 2” MAXIMUM DIAMETER

PART: 12532 - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PART: 12531 - BAND SAWMILL - BAKER 3674D USED - VERY GOOD CONDITIONModel: 3674DMfg. 2022551 hours - 09/18/23Currently used 2-3 days a weekOne ownerPortable Log deck

PART: 12530 - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PART: 12529 - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005

PART: 12512 – DOWEL MACHINE – HAWKER 2000 USED – GOOD CONDITION – AS IS Complete with knife sharpener Power hopper feeder Various sizes feed rollers Various sizes sleeves Extra sets of blades