PART: 12611 – STRAIGHT LINE  RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984

PART: 12610 – STRAIGHT LINE  RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017

PART: 12609 – STRAIGHT LINE  RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions

PART: 12608 – STRAIGHT LINE  RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...

PART: 12607 – STRAIGHT LINE  RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...

PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED – GOOD CONDITIONS Capacity: 75″ x 169″ Depth of Cut: 2″ Max. Blade Size: 8-5/8″(220mm) Main motor 4 HP 230 volts three phase Depth of cut 2” max Scoring unit with insert knives Saw head rotates 90 degrees for rip or cross cutting Automatic shifting back grid Two gauging bars with flip stop for midway fenceBottom rollers with manual control for easy movement of larger panels Approx....

PART: 12505-E - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of panelsIntegrated dust...

PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY CHAIN VERY GOOD CONDITION

PART: 12541 - GANG RIP SAW - 50 HP - LOBOUSED - EXCELLENT CONDITIONModel TRS-1014220v/440v, 3ph50 Hp motor2Hp Feed MotorVariable Feed: 30 - 100 FPMArbor length: 11"70mm/2 keyway spindleAdjustable FenceChain in excellent conditionPush button motor controlsLaser

PART: 12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED USED Roll-Feed Optimizing and Defecting Cut-Off Saw Precise and Safe Feeding via Eleven Solid Feed Rolls Main Saw Motor: 8.7 HP, 480v, 3ph Pneumatic Blade Cycle 237" Infeed Marking Conveyor Station 19' Outfeed Belt Conveyor with Four Pneumatic Sorting Kickers 10.5" Kvara User-Interface w/ Push-Button Keyboard Blade Diameter: 500mm Variable Speed Feed up to 787 FPM Sound/Safety Hood 480v, ...

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE USED - VERY GOOD CONDITIONS Year of Manufacture: 2018 Condition: Excellent Electric: 460 Voltage 60 Cycle 3 Phase GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width; .25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw: Blad...