PART: AMX-10038 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTORUsed – Like new – 50 – 100 hour useBrand: AMX MachineryModel: 1AM-1180-EGGasoline motor 13 HPMaximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/533846659

PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALLUsed – Excellent condition - Currently just under 50 hours of useWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide  x 12" high cant capacityCurrently just under 50 hours of use

PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1.    Saves Time and labor c...

PART: 12612 – SHREDDER – WOOD – 30 HP – HORIZONTAL – CREESSWOODUSED – GOOD CONDITIONSModel: EF-12-30SRSTCutterhead Motor: 30 HP, 230/460v, 3phFeed Motor: 0.75 HP, 230/460v, 3phVibrating Infeed Conveyor: 12" x 120"Variable Speed ControlAmp Meter for Cutterhead MotorYear: 20163/4” Screen, Currently

PART: 12611 – STRAIGHT LINE  RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984

PART: 12610 – STRAIGHT LINE  RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017

PART: 12609 – STRAIGHT LINE  RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions

PART: 12608 – STRAIGHT LINE  RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...

PART: 12607 – STRAIGHT LINE  RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...

PART: 12606 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – GOOD CONDITIONSMODEL: VTH 35/8/2 VUMODEL: VTH 35/8/2 VULow Speed / High Torque DesignEasy AccessibilityDrive Motor HP 404-Way Indexable Cutting InsertsHigh Output “Torsion Point” Cutting RotorSevere Duty ConstructionStress-Free Frame, Robotically WeldedOversized DrivetrainHeavy Duty Powerbelt Rotor DriveHeavy Duty Spherical Roller BearingsISO 9001 ManufacturedAllen Bradley Control Panel – 460V (UL)10” diamete...

PART: 12605 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – VERY GOOS CONDITION – ABUT 100 HRS USE ONLYMODEL: VTH 35/8/2 VUMFG. 2018MOTOR 40 HP, 220/460V, 3 PHASECONVEYOR VIBRATORY 16 FEE LONGMACHINE 4 FEET LONGTOTAL LENGHT 20 FEET

PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVOUSED – VERY GOOD CONDITION – REFURBISHEDMODEL: SP 6PThese machines have been designed for spray lineal parts i.e. Moldings, Flooring, Wood Strips, etc.and can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for di...

PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881

PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED – GOOD CONDITIONS Capacity: 75″ x 169″ Depth of Cut: 2″ Max. Blade Size: 8-5/8″(220mm) Main motor 4 HP 230 volts three phase Depth of cut 2” max Scoring unit with insert knives Saw head rotates 90 degrees for rip or cross cutting Automatic shifting back grid Two gauging bars with flip stop for midway fenceBottom rollers with manual control for easy movement of larger panels Approx....

PART: 12584 – BORING MACHINE - RITTER R246 USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control.Equipped with: 4 Overhead adjustable pneumatic holddowns on each head, 72" long...

PART: 12575-E – BAND MAGNETIC SEPARATOR Unused, “New” Conditions Motor: 3 HP, 230/460V/3/60 Marca: Wolverine 29-1/2” wide x 70” long Belt Motor: WEG 3HP Approximate Weight/unit (kgs): 776 Aproximate Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572 Speed - It is fixed speed and can be changed with a controller. Magnet power is strong - the original design was to pull small scrap metal from sand on conveyor belt.

PART: 12573 - PRODUCTION DRILLING MACHINE - RILESA - UNI-X 2200 MM USED - VERY GOOD CONDITIONPLC Control System with 15” Color TFT Touch-screen DisplayPneumatic magazine with ergonomic and user-friendly accessEnd Mounted Horizontal Drilling Groups: 2 @ 1.1kW = 1.5HP 3-5000RPMRear Mounted Horizontal Drilling Groups: 4 @ 1.1kW = 1.5HP 4000RPMTop Mounted Vertical Drilling Groups: 6 @ 1.1kW = 1.5HP 4000RPMPneumatic side movement of drill groups for copy function of holesBackstop clamp ...