PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALLUsed – Excellent condition - Currently just under 50 hours of useWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide  x 12" high cant capacityCurrently just under 50 hours of use

PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1.    Saves Time and labor c...

PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS - BAKER Used - Good condition 460V | 3 Phase | 22’ in length | 2 20HP saw motors | Extra parts including 5-6 bands

PART: 12567 - HORIZONTAL BAND RESAW - BAKER Used - Good condition 3 Phase | 570V | 30HP | Capacity is roughly 6" wide x 6" tall

PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504 In Good Running Condition & Ready to ShipMain motor: 25HP, 220V/440V* (prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump - Main Saw Motor - 25HPMaximum cutting capacity: 10" x 16"Distance from blade to conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x 1" WSaw blade speed: 7300 FPMFloor to table height: 40"Infeed table: 106" L x 16" WInfeed belt: 215-3/4" ...

PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000USED – GOOD CONDITIONMINIMUM LENGHT 16”VARIABLE SPEED 75 - 250 LINEAL FEET/MINMAIN MOTOR 15 HP, 3,600 - 5,000 RPMFEED MOTOR 5 HPMACHINE DIMENSIONS 42” W X 48” L X 46” HMACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” HWEIGHT: 3,000 LBSSEVERAL ROLLERS INFEED & OUTFEEDSEVERAL DIAMETER CUTTERHEADSSEVERAL KNIVE SETS & SETTERS

PART: 12535 - DOWEL MILLING MACHINE - HAWKERUSED – GOOD CONDITION – AS IS 2” MAXIMUM DIAMETER

PART: 12532 - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PART: 12530 - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PART: 12529 - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005

PART: 12512 – DOWEL MACHINE – HAWKER 2000 USED – GOOD CONDITION – AS IS Complete with knife sharpener Power hopper feeder Various sizes feed rollers Various sizes sleeves Extra sets of blades