PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...

PART: 2CA-RM70-E - ROUND POLE MILLING MACHINE - CAPACITY 3/8” - 2-3/8” DIAMETER NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, ...

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE USED - VERY GOOD CONDITIONS Year of Manufacture: 2018 Condition: Excellent Electric: 460 Voltage 60 Cycle 3 Phase GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width; .25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw: Blad...

PART: 12473 - KITCHEN CABINET - COUNTERTOP MANUFACTURING LINE - EVANSUSED - GOOD CONDITIONINDEX TABLEPINCH ROLLERPOSTFORMERCOVING BACKSPLASHPOSTFORMER 0110

PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005

PART: 2CK- RAPIDEDGE-PRO-E – AUTOMATIC EDGEBANDERFrom cabinet parts to cabinet doors, this Edgebander can do it all.Are you tired of spending valuable production time adjusting your edgebander to run various edge banding material? Do you want a professional-grade edge banding machine that can work quickly and efficiently? Look no further than the new Cantek RapidEdge Pro Automatic Edgebander!Our top-of-the-line solution is designed to make edge banding a breeze. With its advanced technology a...

PART: 2CK-MX370PW – AUTOMATIC EDGEBANDER NEW WITH WARRANTYFrom cabinet parts to cabinet doors, this edgebander can do it all.The MX370PW Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses...

PART: 2CK-MX370P – AUTOMATIC EDGEBANDERFrom cabinet parts to cabinet doors, this Edgebander can do it all.The Cantek MX370P Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.F...

PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...

PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532 USED – VERY GOOD CONDITION 2019 Rover A Smart 1532 Machine located in Northern, CA. Available for inspection still under power Pictures are from 12-18-2023 

PART: 12512 – DOWEL MACHINE – HAWKER 2000 USED – GOOD CONDITION – AS IS Complete with knife sharpener Power hopper feeder Various sizes feed rollers Various sizes sleeves Extra sets of blades

PARTE: 3EA -TS300K - ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP Nueva con garantíaFeaturesMax.keyway width per cut :16mmMax. stroke : 300mmNo. of stroke per minute: 8 steps(Low: 22,26, 31, 39spm ; High :44,52,61,78 spm)- Spindle motor : 5HP (4P/8P)- Working table : Dia. 560mm- Inner hole dia. of table : Dia. 75mmStandard Accessories1. Lubrication system2. Rotary table3. Tool box & tools4. Rubber chip cover (4pcs/set)5. Chip box Optional Accessories2. SK-9 Strong 3 Jaw scroll chuck 1PC...

LUMBER CUT TO SIZE15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”   3,000 -   5,000 foot - 5/8 X 3-1/4 X 70” Per truck load - every 2 weeksLUMBER FOR PALLETSGREEN OR AIR DRIED 

PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH New with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyEach notch 9" lenght standard Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate 2 main motors: 15 HP, 220/440V each – used motor, checked and tested Feed motor: 5 HP,220/440V – used motor, checked and tested Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400 lb.

PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER NEW BLADES FOR HAWKER DOWEL POLE MILLING MACHINES MODELS: HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4" THICKNESS  (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNESS)$ 440 USD PER SETFREIGHT INCLUDED IN THE USA BY FEDEX OR UPSWhen ordering in the Cart Summary, Get a quote on Postage with your Zip CodeThen select "Freight inlcuded in the USA by FEDEX or UPS

PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKERNEW BLADESFOR HAWKER DOWEL POLE MILLING MACHINESMODELS: HAWKER 500, HAWKER 1500, HAWKER 2000, ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4" THICKNESS - (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNES)

PART: AMX-10200-E - COUNTERTOP SAW - 5 HPNEW WITH WARRANTYSAW BLADE 14”MOTOR 5 HP, 220V, 3 PHASESTARTER INCLUDEDMACHINE MEASURES: 1.5 MTS WIDHT X 1.3 MTS LENGTH X 1.1 MTS HEIGHTTABLE HEIGHT: 27.5” (70 CM)OPTIONAL:MOTOR 5 HP, 220V, 1 PHASE