PARTE: 1SL-DC-BV25B - TORNO PARA METAL DE 240 X 400 MMNUEVO CON GARANTIAMOTOR 1 HP, 220V, 60 Hz, 2 FASESCAPACIDAD DE VOLTEO: 240 MMDISTANCIA ENTRE PUNTOS: 400 MMDIAMETRO DEL CHUCK: 125 MMVELOCIDADES: 6 VELS (115-1620 RPM)DIAMETRO HUSILLO: 25 MMPESO: 135 KGSTIPO DE EMPAQUE: 1 CAJA ACCESORIOS PARA EL TORNO - SE VENDEN POR SEPARADO:- CHUCK DE 4 MORDAZAS - DC-4JC- CONTRAPUNTO GIRATIRIO (CONO MT2) - DC-RC- LUNETA FIJA - DC-SR- LUNERA VIAJERA - DC-FR

PARTE: 1SL-DC-HQ4003A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1NUEVO CON GARANTIADESCRIPCION:- MOTOR 1 HP, 220V, 60 Hz, 2 FASES- HACE ROSCAS MILIMETRICAS Y ESTANDARTORNO:- CAPACIDAD DE VOLTEO: 280 MMDISTANCIA ENTRE PUNTOS: 350 MMDIAMETRO DEL CHUCK: 100 MMVELOCIDADES: 7 VELS (160-1360 RPM)HUSILLO: 19 MMTALADRO:BROQUERO: 1.5 - 13 MMCARRERA DEL HUSILLO: 80 MMCAPACIDAD DE GIRO DE LA CABEZA DEL TALADRO: 90 GRADOSVELOCIDADES: 14 VELS (117-1300 RPM)MEDIDAS TOTALES: 42" LARGO X 23" ANCHO X 35" ALTO�...

PARTE: 1SL-DC-MBS412 - SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP  4.5" DIAMETROMOTOR: 3/4 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 3 ( 20,29,50 METROS POR MINUTO)MAXIMO DIAMETRO DE CORTE: 4-1/2"MAXIMO CORTE EN RECTANGULOS: 4" X 6"DIMENSIONES DE LA CINTA: 1/2" X .025 X 64-1/2"PESO: 63 KGSEMPAQUE: 1 CAJA

PARTE: 1SL-DC-MBS7 – SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP. 7" DIAMETRONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 41,49, 69 METROS POR MINUTOMAXIMO DIAMETRO EN TUBOS: 7"MAXIMO DIAMETRO EN RECTANGULOS: 7" X 12"DIMENSIONES DE LA CINTA: 3/4" X .032 X 93"PESO: 185 KGSEMPAQUE: 1 CAJAMEDIDAS YA INSTALADA: 2.0 MTS LARGO X 1.2 MTS ANCHO X 1.6 MTS ALTOINCLUYE BOMBA PARA REFRIGERANTE

PARTE: 2GM-PSR - ROLADORA ELECTRICA - 50" ANCHOPARTE: 2GM-PSR-5016 – ROLADORA - 50” x 16GA - 1 HP, 220/440V, 3 PHPARTE: 2GM-PSR-5016-1PH – ROLADORA - 50” x 16GA - 1.5 HP, 220V, 1 PHPARTE: 2GM-PSR-5014 – ROLADORA - 50” x 14GA - 1.5 HP, 220/440V, 3 PHFeatures:- ISO 9001 certified- Heavy welded all steel construction for maximum rigidity- Silence electrical motor- Quick release top roller- Two Powered driven Rolls- Precision ground rollers- 1” roll opening- All three rolls are made o...

PARTE: 2MA-FP-4075 - LIJADORA - CALIBRADORA DE METAL - 40" ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:                         Model  FP-2560              FP-4075                                   FP-5285Sanding Capacity                     24” x 6-1/8”                    40” x 6-1/8”                               51” x 3-1/2”Abrasive...

PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA - CALIBRADORA DE METAL – 25” ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:                         Model  FP-2560              FP-4075                                   FP-5285Sanding Capacity                    24” x 6-1/8”                     40” x 6-1/8”                               51” x 3-1/2”Abrasive Belt ...

PARTE: 2GM-SBR-5216 - GUILLOTINA, DOBLADORA Y ROLADORA - 3 EN 1Bed width: 52”  Shear capacity: 16 GaBending capacity: 16 GaRolling capacity: 16 GaMax bend angle: 90 degMin rolling diameter: 2-1/2”Box depth:  4”Power requirement: ManualShipping dimensions:  67” largo x 30” ancho x 46” altoShipping weight: 1210 lbs Standard Features:ISO 9001 certifiedAll steel heavy body constructionOne year warranty for parts

PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...

PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge

PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORAStandard Features:ISO 9001 certifiedHP Heavy Duty AC main motor, 110VHeavy welded all steel construction for maximum rigidityStandard Pittsburgh AttachmentStandard Round Power Flange Attachment & Right Angle, Double Seam Rolland Drive Cleat Roll , all in one, no installation is required                     ACME side can be operated at same timeHeavy Duty caster wheels for easy movingOne year warranty for parts Standard Eq...

PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”, 2-1/2", 3". Angúlo máximo 30°

PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”. Angúlo máximo 35°

PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...

PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO 2GM-BB-412-6HD            4 PIES LARGO x 12 Ga.2GM-BB-612-6HD            6 PIES LARGO  x 12 Ga.2GM-BB-812-6HD            8 PIES LARGO  x 12 Ga.2GM-BB-1014-6HD          10 PIS LARGO X 14 Ga.Standard Features- ISO 9002 certified- Large 1-9/16” beam opening, adjustable- 1” beam adjustment ( front and back )- Total pieces fingers assortment:- BB-412-6HD: 2”/1pc, 3”/4pcs, 4”/2pcs, 25”/1pc- B...

PARTE # 2MA-HBB-0412 - DOBLADORA HIDRAULICA - USO RUDOModel # 2MA-HBB-0412, 4’ x 12 GaModel # 2MA-HBB-0410, 4’x 10 GaModel # 2MA-HBB-0612, 6’ x 12 GaModel # 2MA-HBB-0610 , 6’x 10 GaModel # 2MA-HBB-0812, 8’ x 12 GaModel # 2MA-HBB-0810 , 8’x 10 GaModel # 2MA-HBB-1014, 10’ x 14 GaModel # 2MA-HBB-1010, 10’ x 10 GaStandard Features:·         Taiwan Machines·         ISO 9001 certified·         Hydraulic adjustment for opening·         Hydraulic pow...

PARTE: 2GM-WDC-FP40 - COLECTOR DE POLVOS PARA METAL - 2,100 CFM - 5 HPElectrics: 220/440V, 3 PH2,100 CFM, 5 HP for 2MA-FP-2560 & 2MA-FP-4075 Metal SandersInlet opening: 8"Wet dust collection systems offer more safe and efficient method for collection of hazardous grinding/sanding/cutting dust generated by a variety of processes.The CAT wet dust collector offers many superior features.CABINET - made of welded stainless steel constructionFRONT DOOR - easily removed for maintenance & cleaning and e...

PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"MOTOR: 4 HP, 220V, 3 FASES, 60 HZVELOCIDAD DISCO: 2,800 RPMTRANSMISION: DOBLE BANDAINCLINACION PRENSA 45 GRADOS (IZQ Y DER)DIAMETRO DEL DISCO: 16" X 1" X 1/8"DIAMETRO FLECHA: 1"PESO: 90 KGSCAPACIDAD DE CORTE:TUBO: 5" DIAMETRO X 1/4 ESPESOR PAREDANGULO: 6" X 4" X 3/8"SOLIDO: 1-1/2" DIAMETRO

PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]:  0,5 – 1,2 mmBandsaw Width [min-max]:  10 – 60 mmSetting Pitch [min-max]:  5 – 35 mmSetting Speed [d...