PART: AMX-10038 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTORUsed – Like new – 50 – 100 hour useBrand: AMX MachineryModel: 1AM-1180-EGGasoline motor 13 HPMaximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/533846659

PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALLUsed – Excellent condition - Currently just under 50 hours of useWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide  x 12" high cant capacityCurrently just under 50 hours of use

PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1.    Saves Time and labor c...

PART: 12612 – SHREDDER – WOOD – 30 HP – HORIZONTAL – CREESSWOODUSED – GOOD CONDITIONSModel: EF-12-30SRSTCutterhead Motor: 30 HP, 230/460v, 3phFeed Motor: 0.75 HP, 230/460v, 3phVibrating Infeed Conveyor: 12" x 120"Variable Speed ControlAmp Meter for Cutterhead MotorYear: 20163/4” Screen, Currently

PART: 12611 – STRAIGHT LINE  RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984

PART: 12610 – STRAIGHT LINE  RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017

PART: 12609 – STRAIGHT LINE  RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions

PART: 12608 – STRAIGHT LINE  RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...

PART: 12607 – STRAIGHT LINE  RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...

PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts only2 Motors 10 HP, 220/440V, 3 phase - connected to 220V2 On/Off Switch with magnetic startersMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depthEach cutterhead with 4 HSS knives installedSaw dust removal: 12.25” wide x 10.5” tall each opening in the back sideSaw dust removal: 2,300 CFM recommended, equivalent to a 3 HP d...

PART: 12606 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – GOOD CONDITIONSMODEL: VTH 35/8/2 VUMODEL: VTH 35/8/2 VULow Speed / High Torque DesignEasy AccessibilityDrive Motor HP 404-Way Indexable Cutting InsertsHigh Output “Torsion Point” Cutting RotorSevere Duty ConstructionStress-Free Frame, Robotically WeldedOversized DrivetrainHeavy Duty Powerbelt Rotor DriveHeavy Duty Spherical Roller BearingsISO 9001 ManufacturedAllen Bradley Control Panel – 460V (UL)10” diamete...

PART: 12605 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – VERY GOOS CONDITION – ABUT 100 HRS USE ONLYMODEL: VTH 35/8/2 VUMFG. 2018MOTOR 40 HP, 220/460V, 3 PHASECONVEYOR VIBRATORY 16 FEE LONGMACHINE 4 FEET LONGTOTAL LENGHT 20 FEET

PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH  NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...

PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...

PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVOUSED – VERY GOOD CONDITION – REFURBISHEDMODEL: SP 6PThese machines have been designed for spray lineal parts i.e. Moldings, Flooring, Wood Strips, etc.and can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for di...

PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881

PART: 3AU-DEBU1000 – METAL - BRUSH SANDER – CAPACITY 1000 MM WIDTHNew with warrantyRound Chamfering Machine produces a surface so smooth that a nylon stocking is not snagged. AuDeBu1000 is a deburring machine specializing in round chamfering and capable of simultaneous treatment of large quantities of small-size work and medium-size work up to 1,000mm wide. Round chamfering of product edges has become the standard in sheet-metal processing. As the demand for round chamfering increases, we ca...